Woodworking engraving machine winter maintenance knowledge brief introduction

1. After the work is finished, the countertop should be cleaned in time, which will provide convenience for the next work.
2. Clean the material scraps along the guide rails and guide rails to prevent the machine from appearing during the working process due to debris interference.
3. Regularly clean the lead screw to prevent foreign matter from sticking on the lead screw. The lead screw is very important in the equipment. He determines the accuracy of the machine, and the screw also plays an important role in the transmission process.
4, regularly clean the industrial control box, the Max killer of the circuit board when dust.
Second, oiling
Some customers have better business and equipment workload, and often forget to protect the machine. Some customers do not work for several days or even weeks because of seasonal reasons, and do not pay attention to equipment oiling. Work experience tells us that oiling plays an important role in the maintenance process of the engraving machine. When it comes to autumn and winter, our technical department proposes that the engraving machine should be oiled. The correct way is:
1. First clean the guide rails and the screw. Use the cloth (no hair removal) bar and the oil and material scraps on the screw to clean it off. Due to the low temperature, you can add oil to the guide rails and the screw, so you can add antifreeze oil.
2. The refueling cycle is twice a month, that is, every two weeks.
3. If the machine is not used for a long time, it should be refueled regularly to ensure the flexibility of the transmission system.
4. After the oil is added, move slowly back and forth to ensure that the lubricant can be evenly applied to the guide rail and the lead screw.
Third, the temperature
       The effect of temperature on the engraving machine is not very big, but because many customers add butter to the screw, they forget to clean up in winter, which leads to the opening of each boot. Some studios have low temperature. Although the oil is added, it can still be frozen. On, the machine can't run, we think:
1. Ensure the ambient temperature of the operation room, and reach the room temperature. The staff will not be very cold.
2. Check the applicable temperature of the fueling standard, and reach the minimum temperature.
3. When the machine is not in use, if the room temperature is low, pour out the water in the water tank to prevent freezing of the water tank and the water pipe.
Fourth, cooling water
     Many customers often forget to change the water, especially in autumn and winter. Because the outside temperature is low, the spindle motor is too hot to feel. We hereby remind customers:
1. Cooling water is an important condition for the normal operation of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor, ensure the cleaning of the cooling water and the normal operation of the pump.
2, pay attention to the water level, must not make the water-cooled spindle motor water shortage, so that the motor heat can not be exported in time.
3, pay attention to the ambient temperature, be careful because the water temperature is too cold and cause the water tank and water pipe to freeze.
4. Conditional antifreeze can be used for cooling.