Stone engraving machine rust processing tips

Rusting the main shaft of stone engraving machine is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is very simple and rust, slight rust does not affect the normal operation of the spindle motor, but if it is not processed for a long time, the life of the spindle motor will be shortened.

Stone engraving machine spindle motor rust removal method:

First, by means of skill knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate surface rust, scale, etc., this is the painter's rapid derusting method, can also use the blade, scraper, pointed hammer, wire brush , sanding cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. Simply paying attention to it will cause the machine spindle to deviate from the track.

Second, the use of cleaning lubricants, evenly sprayed on the motor, about half an hour can be used to wipe off the rust on the stone engraving machine with cotton cloth, if the rust is fierce, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.

The difference between stone engraving machine engraving and sand blasting engraving

    Sandblasting engraving is a kind of engraving method that uses high-pressure air to drive the abrasive material such as emery to impact the surface of the stone at high speed to achieve the engraving effect. It uses the cutting plotter to engrave the content to be engraved on the self-adhesive paper, use the self-adhesive paper as the sandblasting protective film, and attach the protective film with the content to the surface of the object to be engraved, and remove the content to be engraved. Control the sandblasting gun for sandblasting.
   
    Stone engraving machine engraving is to place the stone to be processed on the engraving machine. Then, the engraving program is controlled by a computer to control the engraving of the engraving machine to complete the engraving of the characters and patterns.
   
    The stone engraving machine is a three-axis linkage, that is, it can be used for plane engraving or three-dimensional engraving, while sandblasting can only be used for plane engraving.
    
    The stone engraving machine is fully automatic computer control, with good engraving effect, fast speed, saving time and effort. Sandblasting must work for two or more people.
    
    The stone engraving machine is safe and reliable, and basically no one needs to be in charge.
    
    Protective equipment must be worn before blasting, and it is not allowed to work with bare arms. There must be no less than two people working. Unrelated personnel are prohibited from approaching during sandblasting to avoid accidents