When the engraving machine has a problem with the processing order

    What should I do when the engraving machine has an unexpected problem? Let me answer this question below.

    Processing of the knife

    When the knife is inserted, immediately press the “Emergency Stop Switch” button on the machine to terminate the current machining. Check if the workpiece is scrapped, and then run the spindle for about 2 hours according to the spindle running-in procedure. If the tool is a serious tool, it is necessary to check whether the accuracy of the machine is damaged.

    Broken knife treatment

    When the broken knife is found, it is necessary to pause the cutting, record the current machining path number, replace the tool, find the position before the broken point, continue processing according to the starting number, and resume the normal machining state.

    Chuck and workpiece interference

    When interference occurs, immediately press the "Emergency stop switch" button on the machine to terminate the current machining, check whether the workpiece can be repaired, and then re-clamp the tool to continue machining. Generally, the length of the tool to be extended is given on the list of machining processes listed after programming. As long as the tool is selected and clamped as required, interference can be avoided.