Woodworking engraving machine needs attention when carving glass

First, when fixing the glass, be sure to pay a small layer of wood or PVC under the pressure plate to prevent the glass from breaking. This should be noted when carving the glass.

Second, when the knife is low, it is necessary to pay attention to the spindle. Now, when you are about to touch the glass, you only need to use fine adjustment, and each time you want to control the knife to be 0.1mm, if you don’t pay attention, Damage to the glass.

Third, when looking for a job far away, it is best to move the tool to the center of the glass, and determine the origin at this position, so that the depth of the engraving will be relatively uniform.

4. After the engraving, the debris on the engraving machine should be cleaned in time to avoid the damage caused by the glass crumbs.

The above is the problem that the woodworking engraving machine needs to pay attention to when carving the glass. Everyone should pay attention to the engraving of the glass in the future to avoid accidents.