How does the advertising engraving machine fix the board?

1. Adopt suction method. Generally, the engraving machine workbench has a special suction hole. After the acrylic plate is put on, open the gas valve and directly adsorb it on the workbench with air pressure;

2, using lock screws to fix, this is generally a large workpiece or processing accuracy requirements are quite high, and this method needs to reserve more materials;

3, the use of tape bonding method, for the processing of small pieces and the requirements of the high carving, the verification process is used at night;

4, the use of "clip" way, that is, the work surface has a special fixture.

How to fix the board for the advertising engraving machine?

Of course, there are other ways to use less. At the same time, it should be noted that sometimes the above methods are used together. For example, sometimes the suction method is used, and when the four kinds of seals of the workpiece are not good, the air will leak, so the glue is generally sealed and sealed around.

How to fix the board of the advertising engraving machine is clear, what are the materials of the advertising engraving machine sheet?

1, commonly used carving materials

Two-color board, organic board (acrylic), artificial stone, PVC board, wood, MDF, ABS.

2, not commonly used carving materials

Metal materials (steel, alloy, copper, aluminum, etc., mainly used in the mold manufacturing industry), rubber, cowhide, stone, fireproof board, cardboard, aluminum composite board, copper clad board, resin board and other composite materials, horns, bronze , stamps, rubber chapters, etc.

Finally, talk about the use of advertising engraving machine tips?

1. Check if the pliers or chucks selected for engraving are used incorrectly? At the same time, the wear of the pliers or chuck of the wood engraving machine can also lead to the misalignment of the engraved objects. If the pliers or the chuck is too tight, the moment the blade touches the engraved object will also cause the engraving to pop out.

2. For those irregularly shaped engraved objects, the surface seems to have been fixed very tightly, and will also sway back and forth when subjected to downforce. At this point, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or try the tool to fix its regular part, JT2-0ZU and discard its irregular parts.

3. If the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the diamond head of the engraving machine moves too much during the engraving process, the pressure on the side of the tool will cause the engraving. The movement. If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knife will drill deep into the material, causing the material to move during the engraving process.

4. Since the woodworking engraving machine is often equipped with multi-function pliers or chucks, and they are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber pipes. It is helpful to fix the engraved object.

5. For engraving plastic patterns, you can attach the transfer tape to the back of the engraved object, then spray the liquid glue on the side with the tape attached, and then attach it to a surface that can be discarded. This avoids the use of double-sided. Glue, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. The woodworking engraving machine uses a special engraved belt. The side of the belt is more viscous than the other side, so the plate can be moved or replaced at will.