The engraving machine has developed in the past ten years. The user has accumulated several thousand. The macro engraving machine can work continuously for 24 hours. This brings a lot of convenience to many customers with large orders. At the same time, the engraving machine also has maintenance work that cannot be ignored. It cannot be ignored.
1: Voltage problem. Long-term voltage instability can have an unnecessary effect on the engraving effect and shorten the service life of the inverter and spindle motor. Therefore, it is recommended that the voltage is not very stable for users to install the regulator.
2: Access cable. The macro-carving machine, especially the stone machine, has a minimum of 5.5 kW. Especially the double-head machine has been welcomed by users for many years in recent years, and it is also the explosion model of Hongdiao. This determines that the cable connected to the chassis is at least 4 levels.
3: Lubrication problem. The Hongdiao engraving machine adopts imported square linear guides and the bearing capacity reaches two tons. Under high pressure work, the lubricant can not be ignored. Many users of hydraulic oil filling are often busy forgetting to add lubrication or perfunctory things. It is recommended that the hydraulic user must ensure that the minimum hydraulic pressure is 20 times at a time, so as to ensure the smooth entry of oil into each track.
4: Spindle cooling problem: Since the beginning of 2016, the Hongdiao engraving machine uses a compression-cooled water pump, which greatly solves the problem that the user's working spindle temperature is too high for a long time. Users who have not had time to replace the cooling water pump must observe the spindle circulating water in time. Whether the water outlet is blocked or the temperature is too high.
5: Tool selection problem: The main consumables of stone engraving machine are tools. Good horses are equipped with good saddles. Tool selection is especially important. Long-term use of sharpness or different tools will have a great impact on the spindle and bearings. Accelerate bearing damage rate.
6: Standing in the house: cold to the water pump, Weihong card, various styles of tool holders.
