Rusting the main shaft of stone engraving machine is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is very simple and rust, slight rust does not affect the normal operation of the spindle motor, but if it is not processed for a long time, the life of the spindle motor will be shortened.
Stone engraving machine spindle motor rust removal method:
First, by means of skill knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate surface rust, scale, etc., this is the painter's rapid derusting method, can also use the blade, scraper, pointed hammer, wire brush , sanding cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. Simply paying attention to it will cause the machine spindle to deviate from the track.
Second, the use of cleaning lubricants, evenly sprayed on the motor, about half an hour can be used to wipe off the rust on the stone engraving machine with cotton cloth, if the rust is fierce, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.
